VirtualTemplateInterface handles and manipulates individual virtual template interfaces for PPPoE. More...
Inheritance diagram for VirtualTemplateInterface:
Additional Inherited Members | |
 Public Member Functions inherited from RouterPort | |
| void | setAclInID (string) |
| Sets an inbound ACL. More... | |
| void | setAclOutID (string) |
| Sets an outbound ACL. More... | |
| string | getAclInID () |
| Returns the inbound ACL ID. More... | |
| string | getAclOutID () |
| Returns the outbound ACL ID. More... | |
| void | setNatMode (NatMode) |
| Sets the NAT mode. More... | |
| NatMode | getNatMode () |
| Returns the NAT mode. More... | |
| void | setCdpEnable (bool) |
| Enables or disables CDP. More... | |
| bool | isCdpEnable () |
| Returns true if CDP is enabled, otherwise false. More... | |
| void | setRipPassive (bool) |
| Enables or disables RIP passive interface. More... | |
| bool | isRipPassive () |
| Returns true if RIP passive interface is enabled, otherwise false. More... | |
| void | setRipSplitHorizon (bool) |
| Enables or disables RIP split horizon. More... | |
| bool | isRipSplitHorizon () |
| Returns true if RIP split horizon is enabled, otherwise false. More... | |
| void | addEntryEigrpPassive (int, bool) |
| Enables or disables EIGRP passive interface for the specified AS. More... | |
| void | removeEntryEigrpPassive (int) |
| Remvoes EIGRP passive interface for the specified AS. More... | |
| int | getOspfAuthType () |
| Returns the OSPF authentication type. More... | |
| void | setOspfAuthKey (string) |
| Sets the OSPF authentication key. More... | |
| string | getOspfAuthKey () |
| Returns the OSPF authentication key. More... | |
| bool | addOspfMd5Key (short, string) |
| Adds an OSPF MD5 key. More... | |
| void | removeOspfMd5Key (short) |
| Removes the specified OSPF MD5 key. More... | |
| void | setOspfCost (short) |
| Sets the OSPF cost. More... | |
| short | getOspfCost () |
| Returns the OSPF cost. More... | |
| void | setOspfDeadInterval (short) |
| Sets the OSPF dead interval. More... | |
| short | getOspfDeadInterval () |
| Returns the OSPF dead interval. More... | |
| void | setOspfHelloInterval (short) |
| Sets the OSPF hello interval. More... | |
| short | getOspfHelloInterval () |
| Returns the OSPF hello interval. More... | |
| void | setOspfPriority (short) |
| Sets the OSPF priority. More... | |
| short | getOspfPriority () |
| Returns the OSPF priority. More... | |
| void | setDelay (int) |
| Sets the delay. More... | |
| int | getDelay () |
| Returns the delay. More... | |
| void | setBandwidthInfo (int) |
| Sets the bandwidth. More... | |
| int | getBandwidthInfo () |
| Returns the bandwidth. More... | |
| void | resetBandwidth () |
| Resets the bandwidth. More... | |
| void | resetDelay () |
| Resets the delay. More... | |
| void | setIntForAs (short, short) |
| Sets the interval for the specified EIGRP AS. More... | |
| short | getIntOfAs (short) |
| Returns the interval for the specified EIGRP AS. More... | |
| bool | addSummaryAddress (short, ip, ip, int) |
| Adds a summary address for the specified EIGRP AS. More... | |
| bool | removeSummaryAddress (short, ip, ip, int) |
| Removes the summary address for the specified EIGRP AS. More... | |
| string | getZoneMemberName () |
| Returns the zone name in which this port belongs. More... | |
| void | setZoneMemberName (string) |
| Sets the zone name for this port. More... | |
| void | setIpsInID (string) |
| Sets the IPS as inside ID for this port. More... | |
| void | setIpsOutID (string) |
| Sets the IPS as outside ID for this port. More... | |
| string | getIpsInID () |
| Returns the IPS inside ID. More... | |
| string | getIpsOutID () |
| Returns the ips outside ID. More... | |
| void | setProxyArpEnabled (bool) |
| Enables or disables proxy ARP. More... | |
| bool | isProxyArpEnabled () |
| Returns true if proxy ARP is enabled, otherwise false. More... | |
| bool | isIkeEnabled () |
| Check is Ike is enabled on the port. More... | |
| void | setIkeEnabled (bool) |
| Enable or disable Ike on the port. More... | |
| Public Member Functions inherited from HostPort | |
| void | setIpSubnetMask (ip, ip) |
| Configures a static IP address and subnet mask on the port. More... | |
| void | setDefaultArpTimeout () |
| Sets the default timer time for ARP. More... | |
| void | setDhcpClientFlag (bool) |
| Enables or disables the DHCP client on the port. More... | |
| bool | isDhcpClientOn () |
| Returns true if the DHCP client is enabled, otherwise false. More... | |
| ip | getIpAddress () |
| Returns the IP address configured on the port. More... | |
| ip | getSubnetMask () |
| Returns the subnet mask configured on the port. More... | |
| void | ipChanged (ip, ip, ip, ip) |
| This event is emitted when the IP address or subnet mask changes. More... | |
| void | setIpv6Enabled (bool) |
| Enables or disables IPv6 on the port. More... | |
| bool | isIpv6Enabled () |
| Returns true if IPv6 is enabled on the port, otherwise false. More... | |
| void | setIpv6AddressAutoConfig (bool) |
| Enables or disables IPv6 auto config. More... | |
| bool | isIpv6AddressAutoConfig () |
| Returns true if IPv6 auto config is enabled, otherwise false. More... | |
| bool | isSetToDhcpv6 () |
| Returns true if port is set to DHCP v6, otherwise false. More... | |
| void | setIpv6LinkLocal (ipv6) |
| Sets the IPv6 link-local address. More... | |
| ipv6 | getIpv6LinkLocal () |
| Returns the IPv6 link-local address. More... | |
| void | ipv6LinkLocalChanged (ipv6, ipv6) |
| This event is emitted when the IPv6 link-local address changes. More... | |
| bool | addIpv6Address (ipv6, int, Ipv6AddressType, bool) |
| Configures a static IPv6 address and network prefix on the port. More... | |
| void | ipv6AddressAdded (ipv6, int, Ipv6AddressType) |
| This event is emitted when the IPv6 address changes. More... | |
| bool | removeIpv6Address (ipv6, int, Ipv6AddressType) |
| Removes the IPv6 configuration from the port. More... | |
| void | ipv6AddressRemoved (ipv6, int, Ipv6AddressType) |
| This event is emitted when the IPv6 address configuration is removed. More... | |
| void | removeAllIpv6Addresses () |
| Removes all IPv6 address configurations. More... | |
| bool | hasIpv6Address (ipv6) |
| Returns true if the specified IPv6 address is configured on the port, otherwise false. More... | |
| Ipv6AddressConfig | getIpv6Address (ipv6) |
| Returns the Ipv6AddressConfig object of the specified IPv6 address. More... | |
| ipv6 | getUnicastIpv6Address () const |
| Returns a list of Ipv6AddressConfig objects associated to the port. More... | |
| int | getUnicastIpv6Prefix () |
| Returns the port's Unicast Ipv6 Prefix. More... | |
| vector< Ipv6AddressConfig > | getIpv6Addresses () |
| Returns a list of Ipv6AddressConfig objects associated to the port. More... | |
| bool | isInIpv6Multicast (ipv6) |
| Returns true if specified IPv6 address is a multicast address, otherwise false. More... | |
| vector< ipv6 > | getIpv6Multicast () |
| Returns a list of IPv6 multicast addresses configured on the port. More... | |
| void | setMtu (int) |
| Sets the maximum transmission unit (MTU) value on the port. More... | |
| int | getMtu () |
| Returns the maximum transmission unit (MTU) value configured on the port. More... | |
| void | setIpMtu (int) |
| Sets the IP maximum transmission unit (MTU) value on the port. More... | |
| int | getIpMtu () |
| Returns the IP maximum transmission unit (MTU) value configured on the port. More... | |
| void | setIpv6Mtu (int) |
| Sets the IPv6 maximum transmission unit (MTU) value on the port. More... | |
| int | getIpv6Mtu () |
| Returns the IPv6 maximum transmission unit (MTU) value configured on the port. More... | |
| void | setDefaultGateway (ip) |
| Sets the default gateway for this port. More... | |
| void | setDnsServerIp (ip) |
| Sets the DNS server gateway for this port. More... | |
| void | setv6ServerIp (ipv6) |
| Sets the DNS Server IPv6 gateway for this port. More... | |
| void | setv6DefaultGateway (ipv6) |
| Sets the default IPv6 gateway for this port. More... | |
| bool | isInboundFirewallOn () |
| Returns true if the IPv4 inbound firewall is enabled, otherwise false. More... | |
| void | setInboundFirewallService (bool) |
| Enables or disables the IPv4 inbound firewall. More... | |
| bool | isInboundIpv6FirewallOn () |
| Returns true if the IPv6 inbound firewall is enabled, otherwise false. More... | |
| void | setInboundIpv6FirewallService (bool) |
| Enables or disables the IPv6 inbound firewall. More... | |
| Public Member Functions inherited from Port | |
| string | getName () |
| Returns the name of the port. More... | |
| int | getChannel () |
| Returns the channel of the port. More... | |
| void | setChannel (int) |
| Sets the channel of the port. More... | |
| string | getTerminalTypeShortString () |
| Returns the name of the port shortened, without number. More... | |
| string | getPortNameNumber () |
| Returns the port number. Can have something like 0/0/0, etc. More... | |
| PortType | getType () |
| Returns the type of the port. More... | |
| void | setDescription (string) |
| Sets the description for the port. More... | |
| string | getDescription () |
| Returns the description of the port. More... | |
| void | setPower (bool) |
| Sets the power state for the port. More... | |
| bool | getPower () |
| Returns true if the port is on, false if the port is off. More... | |
| void | powerChanged (bool) |
| This event is emitted when the power state of the port changes. More... | |
| bool | isStraightPins () |
| Returns true if the pins are straight, for ethernet. More... | |
| bool | isAutoCross () |
| Returns true if the port is configured for auto crossover, for ethernet. More... | |
| void | setBandwidth (int) |
| Sets the bandwidth for the port. More... | |
| int | getBandwidth () |
| Returns the bandwidth of the port. More... | |
| void | setBandwidthAutoNegotiate (bool) |
| Enables or disables bandwidth auto negotiation. More... | |
| bool | isBandwidthAutoNegotiate () |
| Returns true if bandwidth auto negotiation is enabled, otherwise false. More... | |
| void | setFullDuplex (bool) |
| Enables or disables full duplex mode. More... | |
| bool | isFullDuplex () |
| Returns true if full duplex mode is enabled, otherwise false. More... | |
| void | setDuplexAutoNegotiate (bool) |
| Enables or disables duplex auto negotiation. More... | |
| bool | isDuplexAutoNegotiate () |
| Returns true if duplex auto negotiation is enabled, otherwise false. More... | |
| void | setMacAddress (mac) |
| Sets the MAC address on the port. More... | |
| mac | getMacAddress () |
| Returns the MAC address set on the port. More... | |
| void | macChanged (mac, mac) |
| This event is emitted when the MAC address on the port changes. More... | |
| mac | getBia () |
| Returns the burned-in address of the port. More... | |
| void | setClockRate (int) |
| Sets the clock rate on the port. More... | |
| int | getClockRate () |
| Returns the clock rate on the port. More... | |
| Link | getLink () |
| Returns the link connected to the port. More... | |
| bool | isProtocolUp () |
| Returns true if the line protocol is up on the port, otherwise false. More... | |
| bool | isPortUp () |
| Returns true if the status is up on the port, otherwise false. More... | |
| Process | getEncapProcess () |
| Returns the encapsulation process. More... | |
| Process | getKeepAliveProcess () |
| Returns the keepalive process. More... | |
| QString | getRemotePortName () |
| Returns the name of the remote port. More... | |
| LightStatus | getLightStatus () |
| Returns the link light status. More... | |
| void | lightStatusChanged (LightStatus) |
| This event is emitted when the link light changes. More... | |
| void | lightBlinked () |
| This event is emitted when the link light blinks. More... | |
| void | portStatusChanged (bool) |
| This event is emitted when the port status changes. More... | |
| void | lineProtocolChanged (bool) |
| This event is emitted when the line protocol status changes. More... | |
| void | packetReceived (string, int) |
| This event is emitted when the port receives a packet. More... | |
| void | packetSent (string, int) |
| This event is emitted when the port sends a packet. More... | |
| void | packetReceivedWithDetails (Signal, int) |
| This event is emitted when the port receives a packet with details. More... | |
| void | packetSentWithDetails (Signal, int) |
| This event is emitted when the port sends a packet with details. More... | |
| int | getHigherProcessCount () |
| Returns the higher process count. More... | |
| HardwareQueue | getHardwareQueue () |
| Returns the hardware queue. More... | |
| QueueProcess | getQosQueue () |
| Returns the qos queue. More... | |
| bool | isEthernetPort () |
| Returns true if it is a ethernet port, false if not. More... | |
| bool | isWirelessPort () |
| Returns true if it is a wireless port, false if not. More... | |
| bool | isPowerOn () |
| Returns true if the power is on, false if not. More... | |
| void | deleteLink () |
| Public Member Functions inherited from Process | |
| Device | getOwnerDevice () |
| Returns the device for this process. More... | |
Detailed Description
VirtualTemplateInterface handles and manipulates individual virtual template interfaces for PPPoE.
The documentation for this class was generated from the following file:
